MOT Status
ExpiredMileage
104,090 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake hose slightly deteriorated (3.6.B.4d)
Front Tyre worn close to the legal limit (4.1.E.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Rear registration plate faded but not likely to be misread (6.3.1d)
Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front Tyre worn close to the legal limit (4.1.E.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Front coil spring corroded (2.4.C.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Shock absorber has a slightly worn linkage (2.7.4)
Rear coil spring corroded (2.4.C.1b)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Subframe mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Steering rack gaiter split (2.2.D.2d)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Subframe mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Outer Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Inner Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Shock absorber has a light misting of oil (2.7.3)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front Brake pad(s) wearing thin (3.5.1g)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front Brake pad(s) wearing thin (3.5.1g)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has a light misting of oil (2.7.3)
Front Brake pad(s) wearing thin (3.5.1g)
Front Tyre worn close to the legal limit (4.1.E.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Upper Vehicle structure has slight corrosion (6.1.B.2)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Upper Vehicle structure has slight corrosion (6.1.B.2)
Front Anti-roll bar linkage slightly distorted (2.4.G.1)
Front Brake hose slightly deteriorated (3.6.B.4d)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front Shock absorber has slight corrosion to the casing (2.7.2a)
Front coil spring corroded (2.4.C.1b)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has a slightly reduced damping effect (2.7.5)
hand brake travel high
Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front coil spring corroded (2.4.C.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front coil spring corroded (2.4.C.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has a slightly reduced damping effect (2.7.5)
How Reliable is the Nissan Almera?
Based on 2,976,239 MOT tests across 231,560 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T804 TCD is a 1999 Nissan Almera in Green with a 1,392cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 1999 Nissan Almera models, the average MOT pass rate is 67.7% with a typical mileage of 74,791 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Nissan Almera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 141,538 recorded failures. If you're considering buying T804 TCD, it's worth having these areas checked by a mechanic before committing.
The Nissan Almera typically stays on UK roads for around 30 years. At 27 years old, this Nissan Almera is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of T804 TCD?
You can check the full history of T804 TCD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T804 TCD registered?
T804 TCD is a 1999 Nissan Almera, first registered on 30 July 1999.
Is T804 TCD safe to buy?
The MOT history for T804 TCD shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T804 TCD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T804 TCD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.