1999 Land Rover Defender

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s rear chassis (5.3.6 (a) (i))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached in places (6.1.6 (i) (ii)) DANGEROUS

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both (2.1.3 (g) (i))

both rear bump stops missing

Seat belt slightly damaged Both front (7.1.2 (b) (i))

Anti-roll bar ball joint excessively worn Both rear links (5.3.4 (a) (i))

Fuel system component leaking Fuel filter (6.1.3 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Seat belt slightly damaged Both front (7.1.2 (b) (i))

rear axle fulcrum joint gaiter detereated

Nearside Front Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Drag link end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))

rear axle fulcrum joint gaiter detereated

Offside Front Seat belt slightly damaged (7.1.2 (b) (i))

Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt All steering joints (2.1.3 (g) (i))

Central Exhaust system insecure Mount (6.1.2 (a))

Nearside Front Brake pipe excessively corroded Cross (1.1.11 (c))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt All (2.1.3 (g) (i))

centre exhaust mount and centre exhaust joint corroded

reverse lights not working

Steering damper bush worn

Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt All joints (2.2.C.1c)

Brake pipe excessively corroded Front to rear (3.6.B.2c)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Intermediate drop arm insecure (2.2.B.1a)

Vehicle structure excessively corroded within 30cm of towbar mounting Cross chassis (6.6.6)

Steering damper bush worn

Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt All joints (2.2.C.1c)

Offside Ball joint has excessive play Steering box arm joint (2.2.B.1f)

Offside Rear fog lamp not working (1.3.2b)

Windscreen wiper does not clear the windscreen effectively Both (8.2.2)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

cover missing from n/s/r front seatbelt stalk

slight wear in steering damper bushes

Nearside Drag link end ball joint has excessive play (2.2.B.1f)

cover missing from n/s/r front seatbelt stalk

slight wear in steering damper bushes

oil leak from transfer box

seatbelt cover missing n/s/r front seat

small splits o/s wiper

Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Offside Rear Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Offside Windscreen wiper blade insecure (8.2.2)

Parking brake lever has no reserve travel (3.1.6b)

Steering box has relative movement between sector shaft and the drop arm (2.2.B.1b)

Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)