1999 Honda Civic

Extensively modified vehicle - Airbags Removed, Rear Seats Removed, Roll Cage fitted, 4 Point Harness fitted, Steering wheel not factory,

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Bonnet cannot be secured in the closed position (3.1 (b) (i))

Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

vehicle has been lowered

vehicle has been modified

rear seats missing at time of test

vehicle has been lowered

vehicle has been modified

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

all front and rear suspension components have corrosion

both front wheels lightly binding

Offside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Seat belt retracting mechanism defective (5.2.5b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Child seat fitted not allowing full inspection of adult belt

Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Radius arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Radius arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear crossmember corroded

Temporary fuel cap fitted

Child seat fitted not allowing full inspection of adult belt

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Passenger's seat insecure (6.2.A.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Child seat fitted not allowing full inspection of adult belt

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

N/S/F seat loose?

No centre rear seat belt fitted?

Rear Trailing arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) wearing thin (3.5.1g)

nearside front seat base loose