1999 Honda CB250

Motorcycle structure is corroded but structural rigidity is not significantly reduced main frame of motorcycle. (6.1.1 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced rear swing arm. (6.1.1 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

exhaust system corroded.

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced main frame of motorcycle. (6.1.1 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced rear swing arm. (6.1.1 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

exhaust system corroded.

Chain guard missing ()

Exhaust slightly loose (6.1.2 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Headlamp aim too low and too far to the left (4.1.2 (a))

Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced front mudguard. (6.1.1 (c) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Drive chain so worn it is likely to fail tight links. (6.1.7 (c) (ii)) DANGEROUS

Chain guard missing ()

Exhaust slightly loose (6.1.2 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Chain guard missing ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Chain guard missing ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Chain guard missing ()

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake binding but not excessively (1.2.1 (f))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake binding but not excessively (1.2.1 (f))

Chain guard missing ()

Front Stop lamp not working Switch missing (4.3.1 (a) (ii))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Stop lamp switch with a delay in operation Requires excessive lever travel to operate light (4.3.2 (a) (ii))

Chain guard missing ()

Rear Drive chain slightly loose (6.1.7 (c) (i))

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Horn not working (1.7.3a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)