1999 Yamaha Fzs 600

Rear Shock absorber has a slightly worn bush mono shock linkage (5.3.2 (c))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Suspension arm pin, bush or joint worn but not resulting in excessive movement swing arm (5.3.4 (a) (i))

Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Headllamp bulb cover dropped but not affecting beam.

Rear Brake disc(s) slightly worn (3.2.A1l)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Nail in rear tyre

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear wheel bearings have slight free play (2.4.A.2c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Floor brake test indicates a binding brake (3.3.C2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Object in rear tyre.

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Nail in rear tyre.

Rear Brake disc(s) slightly scored (3.2.A1l)

1) Right front pads low. †2) Front tyre near to legal limit. †3) Rear tyre on legal limit.

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

1) Right front pads low. †2) Front tyre near to legal limit. †3) Rear tyre on legal limit.