1999 Fiat Hymer

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing Both front (5.2.3 (d) (ii))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Headlamp insecure (4.1.1 (c))

Offside Headlamp insecure (4.1.1 (c))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Headlamp aim too low and too far to the right. (4.1.2 (a))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Offside Front brake pipes secure but mounted close to alternater

Offside Headlamp aim too far to the right (4.1.2 (a))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Offside Front brake pipes secure but mounted close to alternater

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Brake performance not tested (1.2.1 (g))

Central Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Brake pipe excessively corroded both pipes (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Central Rear Brake pipe leaking on a hydraulic braking system after load sensor (1.1.11 (b) (ii)) DANGEROUS

Brake load sensing valve stiff (1.1.17 (c) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Central Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))

Front Windscreen washer not working (3.5 (a))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Battery leaking electrolyte (1.9.1)

Offside Front Upper Front position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low and too far to the right. (1.8)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Headlamp aim too low (1.8)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Headlamp aim too high (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

both power steering pipes corroded

oil feed to turbo corroded

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Headlamp aim too low (1.8)

advise exhaust rubber missing

advise center exhaust hanger deteriated

advise center wiper slightly insecure

advise osf wiper split

Registration plate lamp not working (1.1.5c)

both front wheel bearings very slight play

n/s/f tyre close to legal limit