1999 Mercedes-benz Vito

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Fluid leak, but not excessive Gear box. (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced N/S and O/S/F Flitches . (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive N/S/R outer sill section. (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Advised as previous test

Brake load sensing valve seized (3.6.E.3)

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Body / underbody condition detiorated due to corrosion

Injector cuffing

OSF sill corroded outside of prescribed area

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

NSF inner wing under bonnet slightly corroded

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake discs slightly worn and pitted.