1999 Piaggio Vespa

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Front Brake disc(s) excessively scored (3.2.A1l) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Rear suspension bush has excessive free play (2.4.A2a(i)) DANGEROUS

Oil leak

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly 'notchy' (2.2.1a)

Stop lamp missing (1.3.3a)

Front suspension has a slightly reduced damping effect (2.3.6c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension has a slightly reduced damping effect (2.3.6c)

Headlamp switch faulty (1.2.4)

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Motorcycle structure slightly damaged (6.1.1a)

Offside Motorcycle structure slightly damaged (6.1.1a)

Oil leak

Screen slightly damaged

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Motorcycle structure slightly damaged (6.1.1a)

Offside Motorcycle structure slightly damaged (6.1.1a)

Oil leak

screen slightly damaged

Front position lamp deteriorated and function impaired (1.1.1b)

Headlamp aim not tested (1.6)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Wheel alignment slightly misaligned. (2.5.1)

Rear Brake lever mounting insecure (3.1.2a)

Rear Tyre fouling another component (4.1.4)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Wheel alignment slightly misaligned. (2.5.1)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp remains on when the brake is released (1.3.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Headlamp aim too low (1.6)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))