2013 Ford Bongo

Front Integral body structure is corroded but structural rigidity is not significantly reduced X member (6.1.1 (c) (i))

Headlamp has a product on the lens but not seriously reducing light output NS + OS (4.1.4 (b))

Lower sills + Rear inner arch's corroding

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Seat belt anchorage prescribed area is corroded but not considered excessive X member / valence / rear NS + OS inner wheel arch's (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill / behind cover (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Nearside Front jack point bent / rubbing suspension arm

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Seat belt anchorage prescribed area is corroded but not considered excessive X member / valence / rear NS + OS inner wheel arch's (7.1.1 (a) (i))

Nearside Front Nail in tyre ()

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Nail in tyre ()

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear fog lamp does not emit a steady red light (4.5.4 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive both front and both rear,and front valance slight corrosion (5.3.6 (a) (i))

Offside Rear fog lamp does not emit a steady red light (4.5.4 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive both front and both rear,and front valance slight corrosion (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear bump stop missing

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt drop link (2.4.G.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front Direction indicator not working (1.4.A.2c)

untidy wiring under bonnet requires securing

Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Side repeater not working (1.4.A.2c)

Rear fog lamp emits a light other than red (1.3.2e)

untidy wiring under bonnet requires securing

Battery insecure (1.9.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear fog lamp missing (1.3.2a)

Rear fog lamp switch missing (1.3.1a)