1999 Triumph Daytona

Central Front Brake lever has insufficient reserve travel lever back to bars (1.1.2 (a))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Nearside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Rear position lamp obscured but not more than 50% (1.1.1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Rear position lamp obscured but not more than 50% (1.1.1d)

Brake pedal pivots slightly worn (3.1.3a)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front wheel bearings are slightly rough (2.3.5b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear tyre has slight perishing on side wall

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear tyre has slight perishing on side wall

Front Brake disc(s) has slight run out (3.2.A1m)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front brake discs rivots slightly worn.

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Headlamp aim too low (1.6)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Rear mono-shock pivot excessively worn (2.4.B.4)

Rear Registration plate background overprinted or shadowed with text (6.3.1e)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Brake locking device insecure (3.2.A1e)