MOT Status
ExpiredMileage
168,776 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Passenger seat(s) missing at time of test ()
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced side sills n/s and o/s (6.1.1 (c) (i))
Headlamp has a product on the lens but not seriously reducing light output n/s & o/s (4.1.4 (b))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity n/s & o/s (4.2.3 (b) (ii))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Headlamp has a product on the lens but not seriously reducing light output n/s & o/s (4.1.4 (b))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity n/s & o/s (4.2.3 (b) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened corroded (1.1.14 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill, next to rear suspension mount (6.2.2 (d) (i))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened corroded (1.1.14 (a) (ii))
Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front slight movement in trackrod
Offside Rear brake disc worn, pitted or scored, but not seriously weakened corroded (3.5.1i)
both rear valances corroded, however not within 30cm of body mountings
Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Brake pipe slightly corroded font to rear (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear brake disc face slightly corroded
Offside slight movement in trackrod
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Rear Body has slight corrosion valance/arch (6.1.B.2)
Offside Side repeater slightly discoloured (1.4.A.2f)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake load sensing valve seized (3.6.E.3)
Brake pipe excessively corroded front to rear(to load valve) (3.6.B.2c)
Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Rear Body has slight corrosion arch/valance (6.1.B.2)
Offside Side repeater slightly discoloured (1.4.A.2f)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded innersill (2.4.A.3)
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember (6.6.6)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake hose twisted (3.6.B.4c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Rear Brake pipe excessively corroded front to rear (3.6.B.2c)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
o/s/r bumper loose
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Drive shaft which forms part of the suspension coupling gaiter deteriorated, but preventing the ingress of dirt (2.4.G.4e)
Parking brake lever has little reserve travel (3.1.6b)
Condensation at both headlamps
Front and rear brake discs in poor condition
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
nearside rear tyre tread worn
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
TC03 AAC is a 2003 Mercedes-benz Vito in Red with a 2,151cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2003 Mercedes-benz Vito models, the average MOT pass rate is 66.0% with a typical mileage of 105,209 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying TC03 AAC, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 23 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of TC03 AAC?
You can check the full history of TC03 AAC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was TC03 AAC registered?
TC03 AAC is a 2003 Mercedes-benz Vito, first registered on 8 August 2003.
Is TC03 AAC safe to buy?
The MOT history for TC03 AAC shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does TC03 AAC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on TC03 AAC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.