2007 Honda Accord

BOTH REAR ARCHES CORRIDED AND FLAKY

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre slightly damaged (5.2.3 (d) (ii))

N/S/R INNER SILL HOLED AND CORRIDED BUT NOT WITHIN 30 CM

UNDER BODY HEAVY CORRSION BUT NO HOLES

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

BOTH REAR ARCHES CORRIDED AND FLAKY

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre slightly damaged (5.2.3 (d) (ii))

N/S/R INNER SILL HOLED AND CORRIDED BUT NOT WITHIN 30 CM

UNDER BODY HEAVY CORRSION BUT NO HOLES

Front Tyre not fitted in accordance with side wall instructions Both front tyres incorrectly fitted (5.2.3 (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear All direction indicators not working (4.4.1 (a) (ii))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both front track rod ends greasey (2.1.3 (g) (i))

Nearside Front Track rod end split pin missing

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement front (2.4.G.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)