MOT Status
ExpiredMileage
57,805 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside rear brake binding (3.7.B.1)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside rear brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Body has slight corrosion (6.1.B.2)
Offside Body has slight corrosion (6.1.B.2)
Front Body has slight corrosion (6.1.B.2)
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Stop lamp not working (1.2.1b)
Front Body has slight corrosion (6.1.B.2)
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Stop lamp not working (1.2.1b)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
both front brakes slight bind.
Front Steering pivot point has slight play (2.2.B.1g)
Nearside Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Offside Headlamp aim too low (1.8)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Front Drag link end ball joint has excessive play (2.2.B.1f)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)
Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Oil leak
Both lower outer sills rusty but not in structural area.
Both rear floorpans rusted, plated from inside.
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Both lower outer sills heavily corroded but not in structural areas.
Both rear floorpans rusted and holed but plated from inside.
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Sub-frame corroded and seriously weakened (2.4.G.1)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
chassis corroded and lots of plates have been welded on
rear engine mounting bar corroded
How Reliable is the Volkswagen Kombi?
Based on 5,583 MOT tests across 709 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
UFA 560J is a 1971 Volkswagen Kombi in White with a 1,600cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 42.9%.
Across all 1971 Volkswagen Kombi models, the average MOT pass rate is 68.7% with a typical mileage of 33,268 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Volkswagen Kombi fails its MOT is windscreen washer provides insufficient washer liquid, accounting for 371 recorded failures. If you're considering buying UFA 560J, it's worth having these areas checked by a mechanic before committing.
The Volkswagen Kombi typically stays on UK roads for around 62 years. At 55 years old, this Volkswagen Kombi is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of UFA 560J?
You can check the full history of UFA 560J by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was UFA 560J registered?
UFA 560J is a 1971 Volkswagen Kombi, first registered on 16 June 1971.
Is UFA 560J safe to buy?
The MOT history for UFA 560J shows 14 tests with a 42.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does UFA 560J have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on UFA 560J. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.