2016 Alfa Romeo 1750

Nearside Front protective cap missing from lower suspension arm

Nearside Front side light slightly affected by indicator light

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

all tyre valves cracking

sills corroded at front jacking points

speedo cable damaged by exhaust heat - now clipped up

windscreen washers weak

both sills corroded and front jacking point areas holed, other areas bubbling but outwith 30cm of structural points

brake pipes at master cylinder slightly kinked

no steering lock

slight imbalance on rear brake application

slight play in steering box and idler

slight wear in other suspension bushes and cap missing from n/s/f arm

smell of fuel in boot, no signs of dampness

some parts of underside under sealed

speedo cable deteriorated

wipers not parking properly

Braking system leaking (3.6.A.1)

both sills corroded and front jacking point areas holed, other areas bubbling but outwith 30cm of structural points

brake pipes at master cylinder slightly kinked

no steering lock

slight imbalance on rear brake application

slight play in steering box and idler

slight wear in other suspension bushes and cap missing from n/s/f arm

smell of fuel in boot, no signs of dampness

some parts of underside under sealed

speedo cable deteriorated

wipers not parking properly

Braking system leaking brake light switch? (3.6.A.1)

Fuel system component leaking rear most carb, top brass bolt (7.2.3)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part on full lock, touching caliper (3.6.B.4a)

Nearside Front Seat belt insecurely fixed to the vehicles structure seat loose (5.2.1a)

Nearside Front Suspension arm attachment bracket/mounting insecure upper (2.4.G.1)

Nearside Front Track rod end loose (2.2.B.1d)

Offside Front Upper Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

both sills corroded and front jacking points holed, other areas bubbling but outwith 30cm of structural points

brake pipe t pieces not fully secured

brake pipes at master cylinder slightly kinked

clutch pipes touching steering arms on full lock

hand brake cable wrongly routed

no steering lock

signs of oil at n/s/r hub

slight imbalance on rear brake application

slight play in steering box and idler

slight wear in other suspension bushes and cap missing from n/s/f lower arm

smell of fuel in boot, no dampness on tank

some parts of underside under sealed

speedo cable melting on exhaust

wipers not parking properly

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive outer sill holed, beyond prescribed area (5.2.6)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive anti roll bar mounting (2.4.A.3)

temporary masking done to both headlamp lenses beam kick up wrong side

All position lamps adversely affected by the operation of another lamp stop lamp fault (1.1.A.3f)

Battery insecure (1.9.1)

Brake servo vacuum pipe deteriorated not connected (3.6.C.1b)

Front Direction indicator incorrect colour both sides (1.4.A.2f)

Front registration plate missing (6.3.1a)

Nearside Headlamp aim too high and too far to the right. (1.8)

Nearside Stop lamp not working (1.2.1b)

Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive outer sill holed, beyond prescribed area (5.2.6)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive anti roll bar mounting (2.4.A.3)