1981 BMW 316

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Fuel Pipe/s corroded ()

Rear Suspension component mounting repair covered in underseal both side (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Front Inner both side sills jacking point corroded

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))

Offside Rear Fuel Pipe/s corroded ()

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))

Rear Fuel Pipe/s corroded ()

Rear Suspension component mounting repair covered in underseal both side (5.3.6 (a) (i))

Rear fuel tank corroded

Exhaust has a major leak of exhaust gases front box (6.1.2 (a))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii))

Brake performance not tested (1.2.1 (g))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Driver's seat insecure (6.2.A.1)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Offside rear chassis corroding.

Nearside Headlamp not working on dipped beam (1.7.5a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Obligatory mirror missing (8.1.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Registration plate lamp not working (1.1.5c)

Excessive under body corrosion in non testable areas. Battery insecure

Brakes imbalanced across an axle (3.7.B.5b)

Front registration plate insecure (6.3.1b)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate insecure (6.3.1b)

Service brake: efficiency below requirements (3.7.B.7)