MOT Status
ExpiredMileage
134,554 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Integral body structure is corroded but structural rigidity is not significantly reduced Hole in spare wheel well. All underside corroded. (6.1.1 (c) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Play in steering rack inner joint(s) N/S & O/S ()
Rear Exhaust silencer slightly loose (8.1.1 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))
Integral body structure is corroded but structural rigidity is not significantly reduced Hole in spare wheel well. All underside corroded. (6.1.1 (c) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Play in steering rack inner joint(s) N/S & O/S ()
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Exhaust silencer slightly loose (8.1.1 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))
Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at front seat belt mount (5.3.6 (a) (i))
Rear fog lamp tell-tale missing (4.9.1 (a) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Coolant leak ()
Nearside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front sill trim fitted making full inspection difficult
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Play in steering rack inner joint(s) Both sides ()
Inner Both sides coated in sealant
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive n/s/r & o/s/r inner wheel arch to sills (5.3.6 (a) (i))
Suspension spring mounting prescribed area is corroded but not considered excessive n/s/r & o/s/r upper chassis rails (5.3.6 (a) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Unable to fully inspect welding repair due to excess underseal
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Unable to fully inspect welding repair due to excess underseal
Brake fluid significantly below minimum mark (1.1.10 (d) (ii))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Central Rear Exhaust system insecure (6.1.2 (a))
Emissions not tested (8.2.1.2 (d))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Headlamp insecure (4.1.1 (c))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill enclose (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring top (5.3.6 (a) (i))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and sill enclose (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring top (5.3.6 (a) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Fuel filter slightly loose
Nearside Front Play in steering rack inner joint(s) ()
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Emissions not tested (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Horn not working (7.7 (a) (ii))
Nearside Front Side repeater not working (4.4.1 (a) (ii))
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Emissions not tested due to exhaust blow (7.3.A.1)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Inner sill corroded but NOT holed
Offside Inner sill corroded BUT not holed
under bonnet bulk head seam corroded BUT not holed
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Rear wheel bearing has slight play (2.6.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside rear chassis leg corrded
Offside Front coil spring corroded (2.4.C.1b)
Offside rear chassis leg corrded
Oil leak
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear wheel bearing has slight play (2.6.2)
Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
n/s/f inner c.v. boot leaking
o/s/f tyre wearing inner edge
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear wheel bearing has slight play (2.6.2)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Front Track rod end ball joint has slight play (2.2.B.1f)
Oil leak
Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear wheel bearing has slight play (2.6.2)
o/s/f tyre wearing inner edge
o/s/r tyre sidewalls & tread area perished
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Coil spring mounting corroded but not seriously weakened (2.4.C.3c)
o/s/r tyre perished tread area
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
rear no plate starting to deteriorate.
Offside Rear wheel bearing rough when rotated (2.6.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
rear no plate starting to deteriorate.
Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Vauxhall Corsa?
Based on 26,893,546 MOT tests across 2,075,660 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V103 OBT is a 2000 Vauxhall Corsa in Red with a 973cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 2000 Vauxhall Corsa models, the average MOT pass rate is 64.6% with a typical mileage of 63,081 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Vauxhall Corsa fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 835,831 recorded failures. If you're considering buying V103 OBT, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Corsa typically stays on UK roads for around 33 years. At 26 years old, this Vauxhall Corsa is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of V103 OBT?
You can check the full history of V103 OBT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V103 OBT registered?
V103 OBT is a 2000 Vauxhall Corsa, first registered on 16 February 2000.
Is V103 OBT safe to buy?
The MOT history for V103 OBT shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V103 OBT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V103 OBT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.