1999 Mazda Bongo

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front position lamp dim

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Anti-roll bar pin or bush excessively worn insecure (5.3.4 (a) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Seat belt missing (7.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front position lamp dim

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i))

Nearside Rear Inner Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Exhaust has a minor leak of exhaust gases front pipe join (6.1.2 (a))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength corroded hole within 30cm of front mounting. (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength corroded within 30cm front mounting. (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired within 30cm of mouning (5.3.6 (a) (i))

Offside Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive shocker mount. (5.3.6 (a) (i))

Oil leak, but not excessive oil leak from gearbox. (8.4.1 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output Both Sides lenses Faded. (4.1.4 (b))

Nearside Rear outer sill corroded.

Offside Front Inner wheel arch corroded.

Rear Both Sides inner & outer wheel arch faded.

various sections corroded and holed(front crossmember, offside front inner wheelarches, rear outer sills, rear inner wheelarches etc) outside prescribed areas

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Centre Rear Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Vehicle structure has slight corrosion (6.1.B.2)

Offside Vehicle structure has slight corrosion (6.1.B.2)

Engine covers fitted obscuring some components in the engine bay

Oil leak

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear exhaust bracket has corroded away

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

rear tyre size 215 65 r 15 100 h

the nsr and osr lower outer sills and inner arch areas have surface corrosion

the nsr tyre is cracking in the tread area

the rear high level stop lamp has a view bulbs not working

Nearside Rear Lower Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Parking brake lever has no reserve travel (3.1.6b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

rear tyre size 215 65 r 15 100 h

the nsr and osr lower outer sills and inner arch areas have surface corrosion

the nsr tyre is cracking in the tread area

the rear high level stop lamp has a view bulbs not working

the rear park brake aplication is uneven

Front Brake pad(s) wearing thin (3.5.1g)

Long handbrake travel

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Rear Registration plate lamp not working (1.1.5c)