MOT Status
ExpiredMileage
85,875 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pedal has insufficient reserve travel (1.1.2 (a))
Emissions not tested Large hole in rear silencer (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases Rear silencer holed (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill at rear (7.1.1 (a) (i))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at rear (5.3.6 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor at seat mounting (7.1.1 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Front Coil spring corroded Both sides (5.3.1 (b) (i))
Front Drive shaft joint constant velocity boot severely deteriorated BOTH sides (6.1.7 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge @ 2.21 mm Bald inner edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both sides front chassis (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view light scratches (3.2 (a) (i))
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Brake pipe excessively corroded front to rear (3.6.B.2c)
Nearside Front Steering system lock to lock check exposes a seriously damaged brake hose (2.2.D.2b)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Steering system lock to lock check exposes a seriously damaged brake hose (2.2.D.2b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Steering system excessively rough (2.2.D.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Corrosion to front to rear and rear brake pipes.
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside front suspension top bearing stiff.
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Braking system leaking (3.6.A.1)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Nail in nearside rear tyre
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Side repeater slightly discoloured (1.4.A.2f)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
bad oil leak
front wipers smearing
nearside front track arm slight play
nearside front tyre worn on edges
offside front track arm slight play
Brake pipe excessively corroded (3.6.B.2c)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Brake pipe slightly corroded (3.6.B.2c)
Offside Inner Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Rear Brake load sensing valve linkage seized (3.6.E.3)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V108 GWB is a 2000 Peugeot 206 in Green with a 1,360cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2000 Peugeot 206 models, the average MOT pass rate is 64.0% with a typical mileage of 71,624 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying V108 GWB, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 26 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V108 GWB?
You can check the full history of V108 GWB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V108 GWB registered?
V108 GWB is a 2000 Peugeot 206, first registered on 14 January 2000.
Is V108 GWB safe to buy?
The MOT history for V108 GWB shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V108 GWB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V108 GWB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.