1999 Mercedes-benz Vito

Horn not working (1.6.2a)

Brakes imbalanced across an axle (3.7.B.5b)

Hazard warning lamps inoperative (1.4.B.1b)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Stop lamp not working (1.2.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

front brake application uneven (3.7.B.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Brake cable has wires broken but is not significantly weakened (3.5.1b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Body has slight corrosion (6.1.B.2)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Brake load sensing valve linkage seized (3.6.E.3)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear fog lamp not working (1.3.2b)

Bonnet retaining device slightly deteriorated (8.4.2)

Brake cable has wires broken but is not significantly weakened (3.5.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Body has slight corrosion (6.1.B.2)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brakes imbalanced across an axle (3.7.B.5b)

Horn not working (1.6.2a)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Registration plate lamp not working (1.1.5c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.5c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)