MOT Status
ExpiredMileage
90,905 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))
Front Registration plate does not conform to the specified requirements (0.1 (d))
Nearside Front Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Rear Brake hose excessively deteriorated (1.1.12 (b) (ii))
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Offside Front Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Rear Brake hose excessively deteriorated (1.1.12 (b) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Nearside Rear Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor cill (7.1.1 (a) (i))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor cill (7.1.1 (a) (i))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Seat belt anchorage prescribed area is excessively corroded door step (5.2.6)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded cill floor (5.2.6)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Front registration plate faded but not likely to be misread (6.3.1d)
Nearside Front Inner Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Inner Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch suspension mounting leg (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Nail in tyre ()
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded floor cill (5.2.6)
Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired cill only spot welded (2.4.A.3)
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded floor cill (5.2.6)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Front registration plate faded but not likely to be misread (6.3.1d)
Nearside Front Inner Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Inner Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch suspension mounting leg (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Nail in tyre ()
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Macpherson strut has slight movement in the upper support bearing assembly Both front (2.5.B.1b)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill section and rear inner arch (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded Floor and inner sill (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded Chassis section (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded Inner sill and rear arch (5.2.6)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Macpherson strut has slight movement in the upper support bearing assembly Both front (2.5.B.1b)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Brake hose slightly chafed (3.6.B.4d)
Offside Rear Brake hose slightly chafed (3.6.B.4d)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Surface rust to nearside and offside inner and outer sill, front and rear floor and front suspenion chassis legs
front floor pans corroded
inner sills corroded
o/s/f brake hose deteriorating
slight play in anti-roll bar bushes
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)
Offside Rear Stop lamp adversely affected by the operation of another lamp (1.2.1f)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
front floor pans corroded
inner sills corroded
o/s/f brake hose deteriorating
slight play in anti-roll bar bushes
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both front brake hoses starting to deteriorate
front floor pans corroded
o/s/f subframe mounting corroded
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both front brake hoses starting to deteriorate
front floor pans corroded
o/s/f subframe mounting corroded
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear wheel cylinder has restricted free movement (3.5.1k)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Upper Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Upper Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Upper Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Upper Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Offside Rear wheel cylinder has restricted free movement (3.5.1k)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V136 GPR is a 2000 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 53.8%.
Across all 2000 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 56,069 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying V136 GPR, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 26 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V136 GPR?
You can check the full history of V136 GPR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V136 GPR registered?
V136 GPR is a 2000 Ford Ka, first registered on 17 January 2000.
Is V136 GPR safe to buy?
The MOT history for V136 GPR shows 26 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V136 GPR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V136 GPR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.