MOT Status
ValidMileage
199,526 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge on 2mm in centre 255/3518 (5.2.3 (e))
Windscreen damaged but not adversely affecting driver's view slight mark off wiper (3.2 (a) (i))
Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint excessively worn front (5.3.4 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Exhaust has a minor leak of exhaust gases flex (6.1.2 (a))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Undertray not fully secure some part missing (8.1.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Exhaust has a minor leak of exhaust gases flex (6.1.2 (a))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Undertray not fully secure some part missing (8.1.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Central Rear Brake hose has slight corrosion to ferrule NS-OS (1.1.12 (f) (i))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge outer - inner edge (5.2.3 (e))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge outer - inner edge (5.2.3 (e))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge inner - outer (5.2.3 (e))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Inner Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge inner - outer (5.2.3 (e))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement front arm (5.3.4 (a) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement front arm (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement front arm (5.3.4 (a) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement front arm (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement front arm (5.3.4 (a) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement front arm (5.3.4 (a) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
front brake application uneven (3.7.B.2)
Nearside Front Suspension arm has slight play in a pin/bush thrust arm bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush thrust arm bush (2.4.G.2)
Offside Front tyre wearing on outside edge
Offside Rear tyre wearing on inside edge
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
N/S/F. Tyre wearing on both edges
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Headlamp aim too high (1.8)
N/S/F. Tyre wearing on both edges
Nearside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Offside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Upper Suspension arm has slight play in a ball joint (2.4.G.2)
nearside rear 3mm and beginning to split on inner sidewall
offside rear 3mm and beginning to split on inner sidewalls
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Upper Suspension arm has slight play in a ball joint (2.4.G.2)
nearside rear 3mm and beginning to split on inner sidewall
offside rear 3mm and beginning to split on inner sidewalls
Oil leak
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f) DANGEROUS
Oil leak
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Chrysler 300 C?
Based on 31,231 MOT tests across 2,003 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V13 MSG is a 2009 Chrysler 300 C in White with a 1,995cc diesel engine. This vehicle has been through 42 MOT tests with a personal pass rate of 76.2%.
Across all 2009 Chrysler 300 C models, the average MOT pass rate is 72.0% with a typical mileage of 75,073 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Chrysler 300 C fails its MOT is parking brake: efficiency below requirements, accounting for 2,046 recorded failures. If you're considering buying V13 MSG, it's worth having these areas checked by a mechanic before committing.
The Chrysler 300 C typically stays on UK roads for around 21 years. At 17 years old, this Chrysler 300 C is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V13 MSG?
You can check the full history of V13 MSG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V13 MSG registered?
V13 MSG is a 2009 Chrysler 300 C, first registered on 9 June 2009.
Is V13 MSG safe to buy?
The MOT history for V13 MSG shows 42 tests with a 76.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V13 MSG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V13 MSG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.