2000 Mazda Premacy

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Headlamp aim beam image obviously incorrect both clouded over (1.8.A.1b)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Outer Subframe mounting prescribed area is excessively corroded sills (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Items removed from driver's view prior to test ()

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt both (2.5.C.1a)

Parking brake lever has little reserve travel (3.1.6b)

Rear arches corroded

exhaust system in very poor condition

Both rear wheel arches corroded

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened Both discs (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear wishbone bush (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear wishbone bush (2.4.G.2)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Underbody surface rust

Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt both (2.4.G.2)

Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt both (2.2.C.1c)

both rear outer wheel arches slightly rusty

Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt both (2.4.G.2)

Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt both (2.2.C.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

both rear outer wheel arches slightly rusty

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Inner Tyre worn close to the legal limit edge (4.1.E.1)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Trailing arm corroded but not seriously weakened (2.4.G.1)

rear exhaust joint corroded

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Outer Rear Seat belt anchorage prescribed area is severely distorted (5.2.6)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

rear exhaust joint corroded

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

front discs rusty

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

front discs rusty

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

clutch worn out?

Front Exhaust system not adequately supported (7.1.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

clutch worn out?

unable to carry out emissions test due to misfire?

A-C leak from condensor

both rear anti roll bar links slightly worn

offside rear tyre perished slightly on side wall

both front tyres worn bald on inner edges,worn down to approx 3.mm

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

both front tyres worn bald on inner edges,worn down to approx 3.mm

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)