1999 Honda CBR1100XX

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

front tyre perished...cracking between tread pattern

Nearside Front Brake pad(s) missing (1.1.13 (c))

Rear Lower Suspension rod pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Horn not working (7.7 (a) (ii))

Rear Lower Suspension rod pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))

Nearside Front Direction indicators not working (1.5.1c)

Front Brake performance not tested (3.3)

Front Decelerometer brake test indicates a binding brake (3.3.E1d)

Rear Brake performance not tested (3.3)

Rear Decelerometer brake test indicates a binding brake (3.3.E1d)

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit uneven wear (4.1.3(ii))

Upper Rear mono-shock pivot worn but not excessive (2.4.B.4)

n/s caliper binding slightly

risers fitted to handlebars that screw into top of fork

Front Tyre valve stem slightly damaged (4.1.2c)

Steering headbearing has slight free play (2.2.2)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Drive chain slightly loose (6.2.1d)

Front Tyre valve stem slightly damaged (4.1.2c)

Handlebar mounting clamp loose (2.1.1a)

Steering headbearing has slight free play (2.2.2)

Drive chain slightly tight (6.2.1d)

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

Headlamp aim too high (1.6)

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Steering movement slightly 'notchy' (2.2.1b)