1999 Honda Accord

Emissions not tested rear silencer broken off - unable to insert probe (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases rear silencer (6.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect lens faded (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/sill end (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect lens faded (4.1.2 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/sill end (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Power steering pipe/hose leaking (2.1.5 (a))

Windscreen washer not working (3.5 (a))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

all underside corroded/painted in underseal

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Side repeater slightly discoloured (4.4.3 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner tyre worn

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner tyre worn

o/s/r and n/s/r tyres worn inner edge

Offside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

o/s/r and n/s/r tyres worn inner edge

Corrosion on front and rear suspension components/arms

N/s/r tyre worn inner edge

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Corrosion on front and rear suspension components

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Corrosion on front and rear suspension components

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)