MOT Status
ExpiredMileage
98,761 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure (1.9.1)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim too high (1.8)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
body and under body corroded
nsr tyre cracking
various welding carried out
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
BATTERY INSICURE
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
BATTERY INSICURE
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
brake service
front brake discs pitted
strut top bushes are slightly deteriorated
underside is undersealed and difficult to inspect
weld repares done prior to mot test and difficult to inspect due to underseal aplyed
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on main beam (1.7.5a)
Offside Seat belt anchorage prescribed area is inadequately repaired (5.2.6)
Offside front brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
brake service
front brake discs pitted
strut top bushes are slightly deteriorated
underside is undersealed and difficult to inspect
weld repares done prior to mot test and difficult to inspect due to underseal aplyed
Lower Steering pivot point has excessive play (2.2.B.1g)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Power steering component(s) leaking (2.3.3b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Steering locking device missing (2.2.C.1g)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front coil spring fractured (2.4.C.1a)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Front Steering locking device missing (2.2.C.1g)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front coil spring fractured (2.4.C.1a)
Offside Front front brake binding (3.7.B.1)
Offside Rear Rear wheel bearing rough when rotated (2.6.1)
Offside Rear Sub-frame has excessive play in a pin/bush (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear coil spring fractured (2.4.C.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Steering column universal joint is excessively deteriorated (2.1.5)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front brake disc slightly scored (3.5.1h)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc slightly scored (3.5.1h)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper blade deteriorated (8.2.2)
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
rocker gasket leaking.Engine sump leaking oil.
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V183 JBA is a 2000 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 50%.
Across all 2000 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 56,069 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying V183 JBA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 26 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V183 JBA?
You can check the full history of V183 JBA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V183 JBA registered?
V183 JBA is a 2000 Ford Ka, first registered on 31 January 2000.
Is V183 JBA safe to buy?
The MOT history for V183 JBA shows 16 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V183 JBA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V183 JBA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.