2000 Ford Ka

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brakes imbalanced across an axle (3.7.B.5b)

Emissions not tested (7.0)

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front,centre and rear chassis rails,undersills,outersills and floors slightly corroded

front number plate cracked

offside front wheel bearing requires attention soon

rear number plate cracked

rear wiper missing

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear coil spring fractured (2.4.C.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Brake pedal spongy (3.3.B.1b)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring cracked (2.4.C.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside front brake binding (3.7.B.1)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake pads low

front n/s & o/s wishbone bushes split

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)