1999 Rover Mini

Exhaust heat shield loose

NSF brake back plate missing

Nearside Front Seat belt webbing slightly damaged or frayed Cut in webbing (7.1.2 (b) (ii))

Nearside Front Shock absorbers has a slightly worn bush Slight perishing in lower bush (5.3.2 (c))

Offside Front Shock absorbers has a slightly worn bush Slight perishing in lower bush (5.3.2 (c))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Exhaust heat shield loose

NSF brake back plate missing

Nearside Front Shock absorbers has a slightly worn bush Slight perishing in lower bush (5.3.2 (c))

Offside Front Shock absorbers has a slightly worn bush Slight perishing in lower bush (5.3.2 (c))

Exhaust heat shield loose but secure

Lower bush perishing on Front shock absorbers

Exhaust has a minor leak of exhaust gases Exhaust blowing at manifold to downpipe (6.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Slight perishing in lower bush on Front shock absorbers

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Exhaust has a minor leak of exhaust gases Blowing at manifold to down pipe (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge Low tread on inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge Low tread on inner edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Slight perishing in lower bush on Front shock absorbers

Exhaust emissions test aborted because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor panel (5.3.6 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor panel (5.3.6 (a) (i))

Offside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor panel (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Indicator tell-tale inoperative offside (4.9.1 (a) (i))

Nearside Front Upper Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front slight bind on brake

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

slight imbalance on front brakes

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Headlamp insecure (1.7.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

nearside front inner wing corroded

nearside rear radius arm slightly seized

Nearside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

rear subframe corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear subframe corroded

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear wheel bearing has slight play (2.6.2)

OSF tie bar slightly bent

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Headlamp aim too high (1.8)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

NSF floorpan corroded and holed

NSR sill corroding

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear wheel bearing has slight play (2.6.2)

OSF floorpan corroding

OSF tie bar slightly bent

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Headlamp aim too high (1.8)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

NSF floorpan corroded and holed

NSR sill corroding

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear wheel bearing has slight play (2.6.2)

OSF floorpan corroding

OSF tie bar slightly bent

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too high (1.8)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Brake cable has wires broken and is significantly weakened (3.5.1b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Headlamp aim too high (1.8)

Nearside Front position lamp(s) not working (1.1.A.3b)

Rear Shock absorber has negligible damping effect (2.7.5)

Nearside Headlamp aim too high (1.8)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Subframe mounting prescribed area is excessively corroded (2.4.A.3)

registration plate character(s) incorrectly spaced (6.3.4a)

Brake pipe slightly corroded (3.6.B.2c)

Vehicle structure has slight corrosion (6.1.A.1)

handbrake cable is corroded