2000 Yamaha YN50

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

No speedo cable fitted.

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Handlebar mounting clamp loose (2.1.1a)

Rear reflector on motorcycle missing (1.4.1)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim too high (1.6)

Registration plate deteriorated (6.3.1d)

Riders seat insecure (6.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Nail in front tyre

Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Direction indicator obscured (1.5.1a)

Headlamp aim too high (1.6)

Headlamp insecure (1.2.3b)

Steering headbearing has excessive free play (2.2.2)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

tyre pressures low

Exhaust is leaking and excessively noisey (7.1.1b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

steering component may be bent... further inspection required