2000 Ford Ka

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Inner Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Vehicle structure has slight corrosion (6.1.B.2)

n/s/r brake sticking slightly

Spare wheel carrier insecure (6.4.2)

Offside Subframe mounting prescribed area is inadequately repaired (2.4.A.3)

Subframe mounting prescribed area is inadequately repaired (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

oil leak from gearbox

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake hose excessively damaged (3.6.B.4d)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake hose excessively damaged (3.6.B.4d)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside outer track rod end joint cover split/missing

Nearside Front Lower Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front brake disc excessively scored (3.5.1h)

Offside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear coil spring incomplete (2.4.C.1a)

Nearside Front Lower Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp aim too low (1.6.D2)

Offside Front coil spring incomplete (2.4.C.1a)

Exhaust has part of the system slightly deteriorated (7.1.1a)