MOT Status
ExpiredMileage
24,650 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
plenty of sealants. welding and fillers used in repairing the corrosion therefore difficult to assess the strength
Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Sub-frame has excessive play in a pin/bush (2.4.G.2)
Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front Vehicle structure has slight corrosion (6.1.B.2)
Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Steering rack gaiter insecure (2.2.D.2d)
Windscreen washer provides insufficient washer liquid (8.2.3)
slight surface corrosion of some brakepipes
slight wear in some suspension bushes
some general all round corrosion in keeping with age of vehicle[underside]
Nearside Front Windscreen wiper blade insecure (8.2.2)
Nearside Rear Registration plate lamp not working (1.1.5c)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
slight surface corrosion of some brakepipes
slight wear in some suspension bushes
some general all round corrosion in keeping with age of vehicle[underside]
Oil leak
nearside frontbrake flexy slightly split
Brakes imbalanced across an axle (3.7.B.5b)
Front Exhaust system not adequately supported (7.1.1)
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Front Tyre fouling a part of the vehicle (4.1.D.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre fouling a part of the vehicle (4.1.D.2)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Oil leak
nearside front tyre on limit
nearside frontbrake flexy slightly split
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
corrosion near side rear chassis
near side and off side rear inner sills corroded
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
corrosion near side and off side rear inner sills
corrosion near side rear chassis
corrosion off side front to rear floor to inner sill
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
some underbody corrosion some corrosion to offside outer sill
Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Front Power steering component(s) leaking (2.3.3b)
Nearside Front Front passenger seat insecure (6.2.3)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V228 FWH is a 2000 Ford Ka in Bronze with a 1,299cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 38.5%.
Across all 2000 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 56,069 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying V228 FWH, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 26 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V228 FWH?
You can check the full history of V228 FWH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V228 FWH registered?
V228 FWH is a 2000 Ford Ka, first registered on 25 January 2000.
Is V228 FWH safe to buy?
The MOT history for V228 FWH shows 13 tests with a 38.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V228 FWH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V228 FWH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.