1999 Nissan Almera

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Shock absorber detached (2.7.2b)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

corrosion and hole in offside front inner wheel arch not within prescribed area and corrosion and hole in nearside rear panel not within prescibed area

corrosion to both rear lower inner wheel arches

front exhaust bracket broken but exhaust still supported

heavy corrosion to front cross member and corroson to offside rear inner sill and nearside rear floor pan

rear brake fluctuating, but not excessively (3.7.B.3)

Battery insecure (1.9.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

All four brake discs in poor condition

Corrosion to both rear floor pans

Corrosion to offside rear inner sill

Corrosion to offside rear inner wheel arch

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

battery insecure

corrosion to both inner & outer sill's

corrosion to front & rear floor pan's & offside front inner wheel arch

offside rear disc pitted

n/s and o/s front outer cv gaitors perished

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp aim too low (1.8)

Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

n/s and o/s front outer cv gaitors perished

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear brake discs pitted

corrosion to both rear inner sills

All underbody metalwork corroded

Both cv gaiters deteriorated

Possible inadequate repaires to rear of outer sills

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

All underbody metalwork corroded

Both cv gaiters deteriorated

Possible inadequate repaires to rear of outer sills

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

corrision to front panel

genral corrision to underside of vechile

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Offside Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)