1999 Volkswagen Bora

Offside Front Macpherson strut damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Inner Drag link end ball joint has slight play rack end (2.1.3 (b) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Macpherson strut damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Inner Drag link end ball joint has slight play rack end (2.1.3 (b) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Macpherson strut damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Central Rear Seat belt likely to become detached in the event of a collision (7.1.1 (a) (ii))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Front Front suspension has slight play in a upper wishbone bearing (2.5.B.1a)

Nearside Front Suspension arm has slight play in a track control arm inner bush (2.5.B.2b)

Rear Shock absorber has a slightly worn linkage (2.7.4)

Front Front suspension has slight play in a upper wishbone bearing (2.5.B.1a)

Nearside Front Suspension arm has slight play in a track control arm inner bush (2.5.B.2b)

Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1)

Rear Shock absorber has a slightly worn linkage (2.7.4)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Front Stop lamp not working (1.2.1b)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear Rear fog lamp not working (1.3.2b)

Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Tie bar/rod has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear coil spring worn so that its cross sectional area is reduced and seriously weakened (2.4.C.1b)

Oil leak

Rear Tyre worn close to the legal limit (4.1.E.1)

Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Rear Tyre worn close to the legal limit (4.1.E.1)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Non obligatory mirror damaged

Rear Exhaust emits blue smoke during acceleration (7.3.A.2c)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Stop lamp not working (1.2.1b)

Non obligatory mirror damaged

Rear Exhaust emits blue smoke during acceleration (7.3.A.2c)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Stop lamp not working (1.2.1b)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Rear Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)