2008 Mercedes-benz Vito

Nearside Front Brake pipe corroded, covered in grease or other material Behind road wheel (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material Behind road wheel. (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting area (5.3.6 (a) (i))

Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Outer Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting area (5.3.6 (a) (i))

Offside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate insecure but not likely to fall off (0.1 (a))

Items removed from driver's view prior to test Across dash top. ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Seat belt missing (7.1.2 (a))

Offside Front Brake hose excessively damaged Rubbing on trim. (1.1.12 (b) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Seat belt missing (7.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Coil spring, top mounting. (5.3.6 (a) (i))

Front Registration plate insecure but not likely to fall off (0.1 (a))

Items removed from driver's view prior to test Across dash top. ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material corroded, both sides (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm front mounting (5.3.6 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material corroded, both sides (1.1.11 (c))

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear chassis area (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp light intensity severely reduced main beam (4.1.4 (a))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear chassis area (6.1.1 (c) (i))

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

front tyres wearing on inner edge

front tyres wearing on inner edges

Nearside Front Headlamp not working on dipped beam (1.7.5a)

front tyres wearing on inner edges

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

no blip test on emission test

Brake pedal spongy (3.3.B.1b)

Centre Stop lamp not working (1.2.1b)