2000 Ford Ka

Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside front wing corroded

offside front brake flexi hose insecure

vehicle has had previous extensive welding repairs

welding repairs heavily undersealed

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Wheel nut(s) loose (4.2.A.1e)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside front brake binding (3.7.B.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

offside front brake flexi hose insecure

previous welding repairs

underbody corrosion

underbody corrosion

Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp insecure (1.1.C.1c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Spare wheel carrier insecure (6.4.2)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust system not adequately supported (7.1.1)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

registration plate character(s) incorrectly spaced (6.3.4a)

Body has slight corrosion (6.1.B.2)

Front Brake hose slightly deteriorated (3.6.B.4d)

Rear Brake hose slightly deteriorated (3.6.B.4d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both rear tyres side walls perished

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Registration plate lamp not fitted (1.1.C.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Front Subframe mounting prescribed area is fractured (2.4.A.3)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

nearside number plate lamp damaged

rear plate slight damage

underside of vehicle various rust patches

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)