2000 Ford Focus

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear coil spring broken both (2.4.C.1a)

Front Headlamp deteriorated but light output not reduced both (1.7.5a)

Front Tyre worn close to the legal limit both (4.1.E.1)

Offside Front Nail in tyre ()

Parking brake lever has little reserve travel (3.1.6b)

corrosion on suspension and under car

fuel and brake pipes corroded

oil leak

Headlamp deteriorated but light output not reduced both (1.7.5a)

Parking brake lever has little reserve travel (3.1.6b)

corrosion on fuel and brake pipes

corrosion under car and on suspension components

n/s/f tyre worn on edge

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Body has slight corrosion (6.1.B.2)

Offside rear brake binding slightly

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

corrosion on brake and suspension components

rear sub frame corroded

slight damage to windscreen

slight noise from n/s/f wheel when rotated

1. As per failure. 2. Damage to windscreen within m.o.t limits at time of test.

Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Front Sub-frame corroded and seriously weakened (2.4.G.1)

Parking brake lever has no reserve travel (3.1.6b)

1.rear subframe becomming corroded 2.plastic sill covers fitted at time of test. 3. near side front steel brake pipe becomming corroded under wheel arch

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

heavy surface rust on rear sub frame

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear coil spring fractured (2.4.C.1a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear coil spring fractured (2.4.C.1a)

Offside Rear wheel cylinder has restricted free movement (3.5.1k)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

heavy surface rust on rear sub frame

Offside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

corrosion starting on brake pipes to flexible and rear on both sides

rear fuel filler pipes corroding

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

corrosion starting on brake pipes to flexible and rear on both sides

rear fuel filler pipes corroding

Nearside Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

all brake pipes to flexibles corroding

fuel filler pipes corroding

heavey surface rust developing on rear subframe and area

slight corrosion starting on brake pipes to flexibles

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

brake pipes to and from flexibles corroding

exhaust system very corroded

heavy surface corrosion round rear suspension and subframe

metal brake pipes from flexibles becoming corroded

rear half of exhaust heavily corroded

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)