1999 Yamaha XV125

Headlamp aim too high (4.1.2 (a))

Headlamp aim too low (4.1.2 (a))

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain excessively loose (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake linkage has abnormal movement due to maladjustment (3.2.A1i)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Rear Brake locking device missing (3.2.A1e)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

rear tyre on the wear limit

Front Horn not working (1.7.3a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

chain and sprockets worn badly