2003 Mazda Bongo Friendee

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

general corrosion underside of vehicle

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

general corrosion underside of vehicle

Offside Front inner sill corroded

general corrosion underside of vehicle

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside front inner sill corroded

Offside Front inner sill corroded but not with in prescribed area

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Headlamp not working on main beam when main put on switches to sidelight (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front inner sill corroded but not with in prescribed area

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive archway (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside corrosion to engine mount area

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive archway (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside corrosion to engine mount area

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch inoperative (4.5.3 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside front brake binding (3.7.B.1)

Offside front brake binding (3.7.B.1)

Service brake: efficiency below requirements (3.7.B.7)

Spare tyre flat

emmissions did not read

Battery insecure (1.9.1)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

emmissions did not read

Battery insecure

Child seat fitted not allowing full inspection of adult belt

Coolant leak

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Service brake: efficiency below requirements (3.7.B.7)

Battery insecure

Child seat fitted not allowing full inspection of adult belt

Coolant leak

Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front crossmember/radiator support corroded both n/s & o/s!!!

Nearside Rear brake disc slightly scored (3.5.1h)

Nearside Rear brake disc slightly pitted (3.5.1h)