MOT Status
ExpiredMileage
90,697 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust corroded
Battery insecure (1.9.1)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)
rear brake application uneven (3.7.B.2)
rear brake recording little or no effort (3.7.B.5a)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust corroded
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside rear brake recording little or no effort (3.7.B.5a)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear coil spring fractured (2.4.C.1a)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside rear brake recording little or no effort (3.7.B.5a)
Nearside Front Brake pipe fouled by moving parts (3.6.B.2a) DANGEROUS
Nearside Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both front discs corroded
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Front registration plate deteriorated (6.3.1d)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front coil spring fractured (2.4.C.1a)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear brake recording little or no effort (3.7.B.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Brake pedal spongy (3.3.B.1b)
Front registration plate deteriorated (6.3.1d)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Both rear tyre walls old
O/s/r chasis rail rusty and has various plates welded to it.
Nearside Headlamp aim too low (1.8)
Offside Registration plate lamp not working (1.1.5c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front brake disc slightly pitted (3.5.1h)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front brake disc slightly pitted (3.5.1h)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Valve stem slightly misaligned (4.1.D.1e)
Nearside Front Valve stem slightly misaligned (4.1.D.1e)
Nearside Headlamp not working on dipped beam (1.7.5a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V362 OOA is a 2000 Ford Ka in Bronze with a 1,299cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 43.8%.
Across all 2000 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 56,069 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying V362 OOA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 26 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V362 OOA?
You can check the full history of V362 OOA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V362 OOA registered?
V362 OOA is a 2000 Ford Ka, first registered on 10 January 2000.
Is V362 OOA safe to buy?
The MOT history for V362 OOA shows 16 tests with a 43.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V362 OOA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V362 OOA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.