2000 Toyota Yaris

Brake pipe excessively corroded both front to rear (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction light on (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Rear Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brake pipe excessively corroded both sides (1.1.11 (c))

Windscreen damaged and affecting the driver's view of the road (3.2 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides axle bushes (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

offside front to rear brake pipe slightly corroded

underbody corroding

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

offside front to rear brake pipe slightly corroded

underbody corroding

Brake pipe slightly corroded both front to rear (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Brake pipe slightly corroded both front to rear (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

nearside rear tyre perished and has a nail in

headlights cloudy

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

headlights cloudy

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded (3.6.B.2c)

front wipers

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)