2000 Ford Fiesta

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Nearside Rear Position lamp not working (4.2.1 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose slightly deteriorated both sides (1.1.12 (b) (ii))

Nearside Rear Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

nearside front tyre wearing low

oil leak

Coolant leak

Oil leak

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Coolant leak

Oil leak

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

off side rear tyre slight perished

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Front suspension has excessive play in a track control arm inner bush (2.5.B.2b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Front suspension has excessive play in a track control arm inner bush (2.5.B.2b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front registration plate deteriorated (6.3.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated (6.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Hazard warning switch faulty (1.4.B.1d)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Headlamp aim too low (1.8)

Offside Rear fog lamp not working (1.3.2b)

n/s/rear outer wall started cracking

o/f/head lamp glass slightly cracked

o/f/bottom fog lamp glass broken

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Stop lamp not working (1.2.1b)

n/s/rear outer wall started cracking

o/f/head lamp glass slightly cracked

o/f/bottom fog lamp glass broken

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)