2000 Toyota Yaris

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced center outer sill (7.1.1 (a) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Coil spring corroded all 4 (5.3.1 (b) (i))

Items removed from driver's view prior to test ()

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear tyre on 2.8mm

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

fuel filler pipe slightly corroded

Coil spring corroded all (5.3.1 (b) (i))

Nearside Rear axle bush deteriorated

Offside Rear axle bush deteriorated

Power steering pipe/hose has slight seepage by pump (2.1.5 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Coil spring corroded all (5.3.1 (b) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear axle bush deteriorated

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear axle bush deteriorated

Power steering pipe/hose has slight seepage by pump (2.1.5 (a))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Rear Exhaust has a minor leak of exhaust gases joint (7.1.2)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Rear Exhaust has a minor leak of exhaust gases joint (7.1.2)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Front registration plate faded but not likely to be misread (6.3.1d)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Front registration plate faded but not likely to be misread (6.3.1d)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front registration plate deteriorated (6.3.1d)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Items removed from driver's view prior to test

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nail in offside front tyre

Nail in offside rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too low and too far to the right. (1.8)

Nearside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too low (1.8)

Offside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)