MOT Status
ExpiredMileage
128,302 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Stop lamp(s) not working HIGH LEVEL (4.3.1 (a) (ii))
Nearside Inner Seat belt anchorage prescribed area is inadequately repaired SILL REPAIRED WITH BODY FILLER (7.1.1 (a) (i))
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced RUSTY AND HOLED (7.1.1 (a) (i))
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength RUSTY AND HOLED (5.3.6 (a) (i))
Nearside Inner Suspension component mounting prescribed area is inadequately repaired REPAIRED WITH BODY FILLER (5.3.6 (a) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Registration plate does not conform to the specified requirements (0.1 (d))
Nearside Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Both rear sill / inner sills repairs covered in underseal
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe (5.3.6 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Both rear sill / inner sills repairs covered in underseal
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
both body sills welded repairs and heavily undersealed
front cross member starting to corrode
Brake pipe excessively corroded both rear (3.6.B.2c)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Offside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front front brake binding (3.7.B.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
front cross member corroded
rear number plate water damage
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
front cross member corroded
rear number plate water damage
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Rear Brake pipe slightly corroded (3.6.B.2c)
corrosion on front lower pannel
rear no plate poor
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Rear Brake pipe slightly corroded (3.6.B.2c)
corrosion on front lower pannel
rear no plate poor
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside rear brake binding (3.7.B.1)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
rear brake pipes surface rusting
n/s/f tyre soon . rear brake pipres surface rusting
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
n/s/f tyre soon . rear brake pipres surface rusting
front cros member rusting
slight tear in offside wiper rubber
How Reliable is the Nissan Almera?
Based on 2,976,239 MOT tests across 231,560 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V428 GPX is a 2000 Nissan Almera in Red with a 1,392cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 55.2%.
Across all 2000 Nissan Almera models, the average MOT pass rate is 68.9% with a typical mileage of 70,099 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Almera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 141,538 recorded failures. If you're considering buying V428 GPX, it's worth having these areas checked by a mechanic before committing.
The Nissan Almera typically stays on UK roads for around 30 years. At 26 years old, this Nissan Almera is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V428 GPX?
You can check the full history of V428 GPX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V428 GPX registered?
V428 GPX is a 2000 Nissan Almera, first registered on 7 February 2000.
Is V428 GPX safe to buy?
The MOT history for V428 GPX shows 29 tests with a 55.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V428 GPX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V428 GPX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.