2000 Vauxhall Corsa

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Radius arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Tailgate cannot be secured in the closed position (6.4.1)

front brake application uneven (3.7.B.2)

Nearside Obligatory mirror missing (8.1.1)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Bootlid cannot be secured in the closed position (6.4.1)

Brake cable has wires broken and is significantly weakened (3.5.1b)

Nearside Front constant velocity joint is excessively worn (2.5.C.1b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear coil spring fractured (2.4.C.1a)

Offside Front coil spring fractured (2.4.C.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear coil spring fractured (2.4.C.1a)

Nearside Front Tie bar/rod insecure (2.4.G.1)

Nearside Headlamp aim too high (1.8)

Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear coil spring incomplete (2.4.C.1a)

Offside Front coil spring incomplete (2.4.C.1a)

Offside Rear Brake cable has wires broken and is significantly weakened (3.5.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear coil spring incomplete (2.4.C.1a)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Rear Wiper Blade Not Clearing Screen (Rubber Torn).

Various Areas Underneath Vehicle,Starting To Corrode.

Engine coolant level low

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

nearside rear tyre punctured

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)