1999 Nissan Almera

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Body has a projection caused by corrosion os/ns near the mirror (6.1.C.1)

Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings os/ns wheel arc (6.1.B.2)

Front Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded near the tank (3.6.B.2c)

Nearside Rear rear brake binding (3.7.B.1)

Nearside Rear rear parking (secondary) brakes imbalanced (3.7.B.6b)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Body has a sharp edge caused by corrosion both wheel arc (6.1.C.1)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened os/ns (3.5.1i)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded near the wheel (3.6.B.2c)

Rear Suspension component mounting prescribed area modified, but not inappropriately os/ns rear suspention leg (2.4.A.3)

play in steering rack

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Registration plate lamp not working (1.1.C.1d)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Inner Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Ball joint has slight play (2.2.B.1f)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front position lamp(s) not working (1.1.A.3b)

Front registration plate deteriorated (6.3.1d)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Ball joint has slight play (2.2.B.1f)

Rear Brake pad(s) wearing thin (3.5.1g)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear rear brake binding (3.7.B.1)

Rear registration plate deteriorated (6.3.1d)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

n/s/r and o/s/r outter sills started to crode

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

n/s/r and o/s/r outter sills started to crode