MOT Status
ExpiredMileage
165,867 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe slightly corroded all 4 (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Suspension arm corroded but not seriously weakened both sides (2.4.G.1)
Front Tyre worn close to the legal limit both sides (4.1.E.1)
Headlamp has a product on the light source but not seriously reducing light output both sides (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area repaired, but not inappropriately inner sill (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Rear coil spring corroded both sides (2.4.C.1b)
parking brake efficiency low
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Brake pipe slightly corroded all 4 (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Suspension arm corroded but not seriously weakened both sides (2.4.G.1)
Front Tyre worn close to the legal limit both sides (4.1.E.1)
Headlamp has a product on the light source but not seriously reducing light output both sides (1.7.5a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Rear coil spring corroded both sides (2.4.C.1b)
parking brake efficiency low
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
cover sills fitted unable to check for rusting
parking brake efficiency low
ware on brake pedal rubber
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Headlamp damaged but light output not reduced (1.7.5a)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
cover sills fitted possible rusting underneath
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Vehicle structure has slight corrosion (6.1.B.2)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
cover sills fitted possible rusting underneath
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
general underbody corrosion
Horn sounds harsh or grating (1.6.2e)
Nearside Rear Anti-roll bar linkage insecure (2.4.G.1)
Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
general underbody corrosion
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
cover sills fitted unable to check for rusting
Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
cover sills fitted unable to check for suspected rusting
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
coil spring corroded (2.4.C.1b)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
coil spring corroded (2.4.C.1b)
o/s/f tyre wearing on edges
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
o/s/f tyre wearing on edges
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
both front tyres age cracking
o/s washers poor
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Offside Stop lamp not working (1.2.1b)
both front tyres age cracking
o/s washers poor
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
both rear tyres slightly worn on inner edges
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
exhaust corroded
n/s/f tyre worn on outer edge
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Honda Cr-v?
Based on 4,177,643 MOT tests across 304,403 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V48 FGP is a 2000 Honda Cr-v in Gold with a 1,973cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2000 Honda Cr-v models, the average MOT pass rate is 70.9% with a typical mileage of 96,500 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Cr-v fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 62,925 recorded failures. If you're considering buying V48 FGP, it's worth having these areas checked by a mechanic before committing.
The Honda Cr-v typically stays on UK roads for around 29 years. At 26 years old, this Honda Cr-v is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V48 FGP?
You can check the full history of V48 FGP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V48 FGP registered?
V48 FGP is a 2000 Honda Cr-v, first registered on 12 January 2000.
Is V48 FGP safe to buy?
The MOT history for V48 FGP shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V48 FGP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V48 FGP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.