2000 Ford Fiesta

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Upper Macpherson strut mounting damaged but not seriously weakened both (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar pin or bush excessively worn D-bushes (5.3.4 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill outer (7.1.1 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated Weeping grease (6.1.7 (g) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Both sills show signs of corrosion

General underbody and chassis corrosion

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Both sills show signs of corrosion

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

General underbody and chassis corrosion

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced 2 places seat mounting and belt area (7.1.1 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced seat mounting and belt area 2 places (7.1.1 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Headlamp aim too low (4.1.2 (a))

Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear brake effort low

Offside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Nearside Front Brake hose excessively twisted kinked (1.1.12 (b) (ii))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension arm pin or bush excessively worn bush (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Fuel Pipe/s corroded ()

Offside Front Inner Tyre worn close to the legal limit edge on limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill area (5.2.6)

Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Fuel Pipe/s corroded ()

Offside Front Inner Tyre worn close to the legal limit edge on limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Inner Tyre worn close to the legal limit edge (4.1.E.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Inner Tyre worn close to the legal limit edge (4.1.E.1)

Fuel pipe/s corroded

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Service brake: efficiency below requirements (3.7.B.7)

Fuel pipe/s corroded

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp aim too low (1.8)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

not able to check all brake pipes

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

nearside rear tyre cracking.

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

nearside rear tyre cracking.

Centre Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Registration plate lamp insecure (1.1.C.1c)

BOTH FRONT BRAKE HOSES PERISHED , ADVISES ASSESSED TO BE OK AT TIME OF TEST