2000 Vauxhall Combo

Both sides sills corroded/ covered in underseal etc

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Spring mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Spring mount (5.3.6 (a) (i))

Rear Suspension spring mounting repair covered in underseal (5.3.6 (a) (i))

Rear Wheel bearing has slight play Both (5.1.3 (a) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated Both. (5.3.4 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Service brake binding but not excessively Both. (1.2.1 (f))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Spring mounts. (5.3.6 (a) (i))

Steering lock inoperative, vehicle first used prior to Sept 2001.

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Wheel bearing has excessive play Both. (5.1.3 (a) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated Both. (5.3.4 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Service brake binding but not excessively Both. (1.2.1 (f))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Spring mounts. (5.3.6 (a) (i))

Steering lock inoperative, vehicle first used prior to Sept 2001.

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i))

Brake performance not tested (1.2.1 (g))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at sill (5.3.6 (a) (i))

Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced at sill (7.1.1 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

bind n/s rear

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Coolant leak ()

Front Windscreen washer provides insufficient washer liquid both sides (8.2.3)

Nearside Front Headlamp aim not tested no dip beam (1.8.A.1c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Brake load sensing valve seized (3.6.E.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill panel (2.4.A.3)

Central Front Exhaust has a minor leak of exhaust gases and very loose but not dangling (7.1.2)

Nearside Front Coolant leak ()

Offside Front Brake pad(s) wearing thin (3.5.1g)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit 1.94 (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 2.11 (4.1.E.1)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit 1.94 (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 2.11 (4.1.E.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Registration plate lamp not working (1.1.C.1d)

Exhaust has a major leak of exhaust gases (7.1.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Spare tyre defective

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

damage to rear valance

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Spare tyre defective

damage to rear valance

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Windscreen wiper blade insecure (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)