2000 Ford Focus

Battery insecure (1.9.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Exhaust emits excessive dense blue smoke during acceleration (7.3.A.2c)

Front Brake pad(s) less than 1.5 mm thick O/S AND N/S (3.5.1g)

Front Brake pad(s) less than 1.5 mm thick O/S AND N/S (3.5.1g)

Headlamp excessively deteriorated so that the light output is severely reduced O/S AND N/S (1.7.5a)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement REAR BUSH (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Rear wheel bearing has excessive play (2.6.2)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Registration plate lamp not working (1.1.C.1d)

Front brake disc worn, pitted or scored, but not seriously weakened O/S AND N/S (3.5.1i)

Offside Front Outer Brake pipe slightly corroded (3.6.B.2c)

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement O/S AND N/S (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Inner Subframe mounting prescribed area is corroded but not considered excessive O/S AND N/S (2.4.A.3)

Rear coil spring corroded O/S AND N/S (2.4.C.1b)

YOUR SERVICE BRAKE HAS ONLY JUST MET THE REQUIRED EFFORT

Brake pipe slightly corroded (3.6.B.2c)

Exhaust emits blue smoke during acceleration (7.3.A.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Nearside Rear Inner Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Rear Body has a projection caused by damage bumper loose (6.1.C.1) DANGEROUS

Brake pipe slightly corroded (3.6.B.2c)

Exhaust emits blue smoke during acceleration (7.3.A.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust system not adequately supported (7.1.1)

Front Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Steering arm has relative movement at its fixings (2.2.B.1h)

Offside Steering arm has relative movement at its fixings (2.2.B.1h)

Offside Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear fog lamp not working (1.3.2b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear wheel bearing rough when rotated (2.6.1)

Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

Parking brake lever has no reserve travel (3.1.6b)

Brake hose slightly deteriorated (3.6.B.4d)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Tyre worn close to the legal limit (4.1.E.1)

coil spring corroded (2.4.C.1b)

exhaust deteriorated

slight noise from both front wheel bearings

Brake hose slightly deteriorated (3.6.B.4d)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both front tyres staring to wear on inner edge

both rear tyres distorted

coil spring corroded (2.4.C.1b)

front brake discs and pads worn

Brake hose slightly deteriorated (3.6.B.4d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear tyres distorted

surface corrosion to under side of car

under side of car dirty

Offside Rear Registration plate lamp not working (1.1.5c)