1999 Honda Accord

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front sub-frame, nearside rear mounting area. (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear sub-frame, nearside front mounting area. (5.3.6 (a) (i))

Corrosion to all front and rear steering and suspension components.

Cross member behind rear bumper badly corroded and is coming away from its mounting areas. Cross member is outside any prescribed areas.

Front and rear sub-frames corroded, corrosion is flaking but underlying metal appears to be solid.

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Bolt missing from front exhaust bracket.

Corrosion around front and rear sub-frame mounting areas.

Corrosion to front and rear sub-frames.

Corrosion to front and rear suspension components.

Corrosion to rear bumper mounting.

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil level on minimum.

Parking brake efficiency only just met. 17%

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Bolt missing from front exhaust bracket.

Corrosion around front and rear sub-frame mounting areas.

Corrosion to front and rear sub-frames.

Corrosion to front and rear suspension components.

Corrosion to rear bumper mounting.

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil level on minimum.

Parking brake efficiency only just met. 17%

Bolt missing from front exhaust bracket.

Corrosion to and around front and rear sub-frames.

Corrosion to front and rear suspension components.

Corrosion to rear bumper mounting bar.

Deterioration to headlamps.

Front exhaust mounting not located correctly.

Oil leaks.

Offside Front Anti-roll bar linkage fractured (2.4.G.1)

Offside Front Suspension component mounting prescribed area is excessively corroded Upper arm mount, under wheel arch. (2.4.A.3)

Subframe mounting prescribed area is excessively corroded Front sub-frame, offside rear mount. (2.4.A.3)

Bolt missing from front exhaust bracket.

Corrosion to and around front and rear sub-frames.

Corrosion to front and rear suspension components.

Corrosion to rear bumper mounting bar.

Deterioration to headlamps.

Front exhaust mounting not located correctly.

Oil leaks.

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Rear Tyre(s) incorrect because tyres with different aspect ratios are fitted on the same axle. (4.1.A.1a)

child seats fitted to offside and nearside rear,seatbelts not fully tested.

corrosion on exhaust.

deterioration to nearside mirror.

front tyres worn close to limit.

offside front tyre badly worn on inner edge.

Exhaust engine idle speed too high (7.3.D.1)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

child seats fitted to offside and nearside rear,seatbelts not fully tested.

corrosion on exhaust.

deterioration to nearside mirror.

front tyres worn close to limit.

offside front tyre badly worn on inner edge.

offside wiper blade torn.

oil level on minimum.

centre and rear exhaust sections blowing

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

nearside wing mirror damaged

Front registration plate letter/figure incomplete (6.3.1c)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)