2000 Rover 75

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Fuel tank insecure strap broken and corroded (6.1.3 (a) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking area (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Offside Obligatory mirror slightly loose (3.3 (b) (i))

rear heat shield loose

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Bonnet retaining device slightly deteriorated (8.4.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Bonnet retaining device slightly deteriorated (8.4.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake hose excessively chafed (3.6.B.4d)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear coil spring fractured (2.4.C.1a)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear coil spring fractured (2.4.C.1a)

front to rear brake pipes slightly corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Centre section of exhaust has impact damage(not blowing or leaking)

Front Brake pad(s) wearing thin (3.5.1g)